Siemens SENTRON Series User Manual

Service and maintenance
6.4 Warranty
Expansion module I(N), I(Diff), analog
30 Manual, 04/2017, L1V30408520AG-01
6.4 Warranty
Procedure
Note
Loss of warranty
If you open the device, you will invalidate the Siemens warranty. Return faulty or damaged
devices to Siemens.
If the device is faulty or damaged, proceed as follows (only during the warranty period):
1. Uninstall the device.
2. Pack the device in a suitable manner to prevent it from being damaged during transport.
3. Return the device to Siemens. You can obtain the address from:
● Your Siemens sales partner
● Technical assistance (https://support.industry.siemens.com/My/ww/en/request
s)
6.5 Disposal
Dispose of or recycle the module in accordance with the applicable laws and regulations in
your country.

Siemens SENTRON Series Specifications

General

Product Series	SENTRON
Category	Measuring Instruments
Frequency Range	45-65Hz
Communication Interfaces	Modbus RTU, Ethernet
Display	LCD
Protection Class	IP20
Operating Temperature Range	-10°C to +55°C
Storage Temperature Range	-25°C to +70°C
Relative Humidity	5% to 95% (non-condensing)
Mounting	DIN rail