Need help?Do you have a question about the Siemens SENTRON ATC6300 and is the answer not in the manual?
General| Mounting | DIN Rail |
|---|---|
| Accuracy class | 0.5 |
| Communication | Modbus RTU |
| Display | LCD |
| Protection class | IP20 |
| Rated voltage | 690 V |
| Secondary current | 5 A |
| Frequency range | 50 Hz to 60 Hz |
| Operating temperature range | -25°C to +70°C |
| Storage temperature range | -40°C to +70°C |
Details the manual's purpose, scope, required knowledge, and target audience for the ATC6300 device.
Provides information on ATC6300 certification, reference documents, and technical support resources.
Outlines the device's features, technical functions, metering capabilities, and application areas.
Lists Siemens products compatible with the ATC6300 for transfer switching applications.
Explains transfer control concepts and classes (PC, CB) for switching equipment.
Details how the ATC6300 controls circuit breakers, transfer switching equipment, and contactors.
Illustrates voltage measurement and control achieved by the ATC6300.
Describes the ATC6300's physical layout, including the user interface, keys, and QR code.
Explains how to navigate the ATC6300's front-mounted LCD menu system.
Details various display pages available on the ATC6300 for monitoring status and data.
Covers fundamental operations like setting the real-time clock and basic device settings.
Explains how to set up and use passwords for physical and remote access.
Details the ATC6300's alarm system, properties, descriptions, and user-defined alarms.
Describes how to enable, disable, and configure the automatic periodic test for generators.
Covers advanced features like remote variables, user limits, and counters.
Specifies the required dimensions for mounting the ATC6300 in a control panel door.
Provides step-by-step instructions for physically installing the ATC6300 device.
Illustrates various connection diagrams for different switching devices and power supplies.
Details methods for connecting AC and DC power supplies to the ATC6300.
Provides guidance on connecting various Siemens circuit breakers and switching equipment.
Describes the ATC6300's three operating modes: OFF, Manual, and Automatic.
Details the ATC6300's digital inputs, their functions, and addressing.
Details the ATC6300's digital outputs, their functions, and configuration options.
Explains how to configure ATC6300 parameters using the device's front panel interface.
Guides on configuring the ATC6300 using Siemens powerconfig software.
Lists and describes all settable parameters (P01-P15) for the ATC6300 device.
Details parameters related to load changeover settings and conditions for the ATC6300.
Configures communication settings for MODBUS TCP/RTU via expansion modules.
Provides a step-by-step guide for the initial setup and commissioning of the ATC6300.
Introduces MODBUS protocols (RTU, TCP, ASCII) supported by the ATC6300 via expansion modules.
Explains available MODBUS functions for reading, writing, and status queries.
Lists register addresses for measured values, status bits, commands, and alarms.
Details the process for modifying ATC6300 parameters using MODBUS commands.
Lists available expansion modules for digital I/O and communication interfaces.
Details the 4DI expansion module (3KC9000-8TL60) including its specifications.
Provides technical details for various expansion modules like 4DI, 4DO, 2DI2DO, 2DO.
Describes the cover frame (3KC9000-8TL67) for front-panel IP65 protection.
Explains the USB front interface (3KC9000-8TL73) for parameterization and its requirements.
Details voltage, range, frequency, and power consumption for auxiliary power supply.
Covers terminal connections, cable cross-sections, and tightening torques.
Lists standards and approvals complied with by the ATC6300 and its components.
Provides dimensional drawings for the main ATC6300 unit.
Shows dimensional drawings for various DI DO, RS485, and Ethernet expansion modules.
To Next Page