Connection
7.2 Connection of the power supply
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
71
Implementation of the dual power supply by means of dual network connection
3KC9625-1 (for IEC applications only)
The ATC6300 can be supplied from two 230 V AC power supply systems with the dual
network connection (3KC9625-1).
Properties of the dual network connection
● Active as from 200 V AC
● Maximum voltage: 288 V AC, frequency: 45 ... 65 Hz
● Internal fuse: Each input is protected with a fuse up to 3.15 A.
Mounting the dual network connection
The dual network connection must be mounted on a standard mounting rail.
1. Place the dual network connection (3KC9625-1) with plug connection from above onto
the standard mounting rail.
2. Align the clip assembly with a screwdriver as shown in the figure.
3. Align the plug connection on the underside.
4. Carefully push the device back until the plug connection audibly engages on the
underside
To Next Page
Loading...
