Functions
5.1 Basic functions
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
37
If an attempt is made to select a parameter that is not available, the following message is
displayed:
With the advanced password, all parameters can be changed and all commands executed.
Password protection against remote access (remote password)
To restrict remote access to the device via MODBUS, a 4-digit numerical code can also be
assigned for this purpose.
This can be set in Menu P03 (see chapter Parameterization (Page 115)).
For entering the password by means of MODBUS, see chapter Password entry using
MODBUS (Page 156).
Entering the password via user interface
To enter the password, the symbol
in the main menu must be selected with the ✓ key.
Note
Visibility
The password entry can only be selected if the password has been activated in menu P03
(see chapter
P03 - Password (Page 123)).
To Next Page
Loading...
