Accessories
12.3 USB front interface - 3KC9000-8TL73
3KC ATC6300 transfer control device
194 Manual, 03/2018, L1V30535632002A-01
USB front interface - 3KC9000-8TL73
By means of the USB front interface 3KC9000-8TL73, the ATC6300 can be parameterized
from the front interface.
This means that the cabinet door does not need to be opened for parameterization using
software. Communication with the ATC6300 is by means of an infrared connection.
The device can subsequently be parameterized using the Siemens powerconfig software.
The connection is set up via the USB. The USB connecting cable is included in the scope of
supply and measures 1.5 m long.
You can find more information on connecting the front interface in the chapter
Parameterization (Page 115).
Note
In order to parameterize the ATC6
300, you require the powerconfig software, version 3.10,
To Next Page
Loading...
