Siemens SENTRON ATC6300 - Expansion Module Ethernet - 3 KC9000-8 TL75; Technical Specifications

Accessories
12.1 Expansion modules
3KC ATC6300 transfer control device
192 Manual, 03/2018, L1V30535632002A-01
12.1.7
Expansion module Ethernet - 3KC9000-8TL75
Using the Ethernet expansion module it is possible to communicate via a MODBUS TCP
interface.
The LEDs on the expansion module have the following meaning:
No connection 100 Mbps 10 Mbps
No activity Full duplex Half duplex
12.1.7.1
Technical specifications
Power supply
Supply voltage
5 V DC (supplied through the ATC6300)
Current consumption (max.)
250 mA
Power loss (max.)
1.25 W
Ethernet interface
Network interface
RJ45 Ethernet 10BASE-T or 100BASE-TX
Compatibility
Version 2.0 / IEEE802,3
Type of connection
RJ45
Insulation
Impulse withstand voltage U
imp
4 kV
Operating frequency impulse withstand voltage
2 kV
Ambient conditions
Operating temperature
-20 … +60 °C
Storage temperature
-30 … +80 °C
Relative humidity
< 80 % (IEC / EN 60068-2-70)