Functions
5.1 Basic functions
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
53
By means of a command menu, any processes, such as the resetting of measurements,
counters, alarms etc., can be executed.
In order to reach the command menu, it is necessary to click on the corresponding symbol in
the main menu:
Note
Password protection
If there is a password, some commands cannot be executed (see chapter
Password
(Page 36)).
After actuating the symbol, the following window opens:
Press the ▲ or ▼ key to switch between the commands. The command is selected with the ✓
key.
To Next Page
Loading...
