Product description
4.2 Menu navigation
3KC ATC6300 transfer control device
22 Manual, 03/2018, L1V30535632002A-01
The following section describes the front-mounted LCD. This display enables the device to
be parameterized (see chapter Parameterization (Page 115)).
In addition, measured values relating to voltage and frequency can be read from it.
Description of the main menu
Procedure for opening the main menu
Simultaneously pressing the ▲ and ▼ keys brings you to the main menu.
Structure of the main menu
Note
Password protection
Access to some menu items can be restricted by setting a password (see chapter
Password
(Page 36)). The unavailable icons are grayed out (shown here in the example of
the setup menu and Command menu). In addition, the message ACCESS LOCKED
indicates that a password is active. In its factory setting, the ATC contains a store
d
password. Therefore, these menu options can only be accessed after entering a password.
To Next Page
Loading...
