Siemens SENTRON ATC6300 - Implementation of the Dual Power Supply by Means of a Voltage Monitoring Relay; Implementation of the Dual Power Supply by Means of an Electromechanical Relay

Connection
7.2 Connection of the power supply
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
73
7.2.2
Implementation of the dual power supply by means of a voltage monitoring
relay
If a dual power supply by means of a voltage relay is used, it must be connected as follows:
7.2.3
Implementation of the dual power supply by means of an electromechanical
relay
If a dual power supply by means of an electromechanical relay is used, it must be connected
as follows:
Info:
Do not use this application in conjunction with generators.