3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
35
The following chapter contains information on:
● Basic functions
● Advanced functions
Setting the real-time clock
The virtual calendar clock of the ATC6300 must be set when the device is first
commissioned. You can select whether the clock is to be reset after each device restart. This
can be set using parameter P01.02 (refer to chapter P01 Settings (Page 121)).
Even if the ATC6300 is currently in operation, you can still set the real-time clock.
1. Select the display page
.
2. Press the + and – keys simultaneously to activate the adjustment of the date / time.
The value to be adjusted is then highlighted.
3. Change the setting.
Using the + and - keys you can jump back and forward between the hours / minutes /
seconds or between month / day / year.
The individual values are changed using the ▲ or ▼ key.
4. Confirm the setting by pressing the ✓ key.
To Next Page
Loading...
