Functions
5.1 Basic functions
3KC ATC6300 transfer control device
46 Manual, 03/2018, L1V30535632002A-01
The ATC6300 has 18 predefined alarms and can also display an additional 4 user alarms.
On occurrence of an alarm, an alarm symbol appears on the display with an identification
code and the description of the alarm in the selected language.
If the navigation keys on the pages are actuated, the popup window with the alarm details is
temporarily hidden and then reappears after a few seconds.
As long as an alarm is active, the red LED next to the alarm symbol on the front panel
continues flashing.
If enabled, the local and remote alarm tones are activated.
The alarms are reset by pressing the OFF key. If the cause of the alarm still exists, the alarm
cannot be reset.
Following the occurrence of one or more alarms, the behavior of the ATC6300 depends on
the properties of the active alarms.
To Next Page
Loading...
