Technical data
7.1 Technical specifications
Expansion module I(N), I(Diff), analog
34 Manual, 04/2017, L1V30408520AG-01
Note
Further technical specifications, mechanical specifications and electrical specifications as
well as ambient and environmental conditions are identical to those of the SENTRON PAC
measuring device. You can find more information in the operating instructions and manual
for the SENTRON PAC 3200
(https://support.industry.siemens.
com/cs/document/26504150/manual-sentron-power-
monitoring-device-pac3200?dti=0&lc=en-WW) or PAC 4200
(https://support.industry.siemens.com/cs/document/34261595/sentron-pac4200-power-
monitoring-device-system-manual?dti=0&lc=en-WW) Power Monitoring Device.
Ambient conditions
The device may only be operated within enclosed dry rooms.
Temperature range
Ambient temperature during operating phase -10 ... +55 °C
Ambient temperature during transport and storage -25 ... +70 °C
Relative humidity 0 ... 95 %
Environmental conditions as defined by IEC 60068
Approvals
CE conformity
The expansion module I(N), I(Diff), analog complies with the requirements of the following European
Directives:
• DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND COUNCIL of February 26, 2014,
on the approximation of the laws of the Member States relating to electromagnetic compatibility and
repealing the Directive 89/336/EEC
• DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND COUNCIL of June 8, 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
Conformity with these Directives is verified by compliance with the following standards:
• EN 61326-1: 2013
• EN 50581: 2012
Approvals for Australia and New Zealand
C-Tick Australian Radiocommunications Act, compliant with AS/NZS CISPR 11; Industrial Emissions
Approval for Eurasian Customs Union
(valid in Russia, Belarus, Kazakhstan, Kyrgyzstan and Armenia)
To Next Page
Loading...
Need help?
General
