Glossary-1
OP27,
OP37 Equipment Manual
Release 05/99
Glossary
A
Calls
attention to high-priority operating states and has therefore to be
acknowledged.
T
ime between the arrival and departure of an alarm message.
Required for data exchange between the OP and the PLC. It contains informa
-
tion concerning the length and size of data areas on the PLC.
The point in time at which a message is issued by the PLC or OP
.
Option for the OP37 for accommodating two 2/3-length 16 bit A
T cards.
PLCs
of the SIMA
TIC S7 series – for example, SIMA
TIC S7-200/300/400
B
Contains basic settings for the OP37 in DOS mode.
Automatic turn-of
f of display back lighting.
A load operation which transfers the operating system to working memory on
the OP
.
C
Definition of system-specific basic settings, messages and screens using the
ProT
ool configuration software.
Alarm
message
Alarm time
Area pointer
Arrival of a
message
AT expansion slot
Automation
systems
BIOS Setup
Blanking
Boot
Configuration
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
