3-11
OP27,
OP37 Equipment Manual
Release 05/99
DescriptionKeysStep
2 Apply input
or
ENTER
The input becomes valid.
Revert from the alphanumeric to the
numeric key assignment.
Cancel input
ESC
The input cursor is deleted.
Revert from the alphanumeric to the
numeric keyboard assignment.
The ”old” input becomes valid once
more.
Input
is generally aligned to the left in alphanumeric fields. The cursor moves
one position to the right following each entry
. If the maximum number of
places is exceeded, the OP overwrites the last input with each subsequent entry
.
In the case of an incorrect entry
, the following possibilities are available with
which to correct it before confirmation. Call in Edit mode.
Incorrect
Input
Action Using Keys
Incorrect
character
Position the cursor on the character and
overwrite it.
The cursor moves one position to the
right after the character has been over-
written.
One character too
many
Delete the character at the cursor posi-
tion. The gap is closed from the right.
DEL
INS
One character too
few
1. Switch to Alpha mode.
A–Z
2. Insert a blank at the cursor position.
The input moves to the right of the
cursor position.
DEL
INS
3. Overwrite the space.
Left justified input
Correct input
General Operation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
