5-2
OP27,
OP37 Equipment Manual
Release 05/99
The
superuser password is defined during configuration. The default value in
the standard configuration is “100”. This setting can be changed using the OP
.
The passwords for levels 1 to 8 must be assigned on the OP
, not during the
configuration. Use the
Passwor
d Pr
ocessing
standard screen (refer to Chapter
5.3). The password must be at least three and not more than eight characters
long. Passwords can be composed of digits and characters
A
to
Z
. Leading
zeroes are not permitted.
The
Passwor
d Pr
ocessing
standard screen (Figure 5-1) provides the following
functions:
Login/logout on the OP
Change and delete passwords,
V
iew password list.
View password list
Exit from standard screen
Password Processing
Login:
Edit:
ESC
Figure 5-1 Standard screen Password Processing
Superuser
password
Format
Standard
screen
Password Protection
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
