Siemens SIMATIC HMI TP 177micro User Manual

Introduction
OP 73micro, TP 177micro (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DF01-0AB0
5
Getting Started
● WinCC flexible for first time users:
Based on an example project, this is a step-by-step introduction to the basics of
configuring screens, alarms, recipes and screen navigation.
● WinCC flexible for advanced users:
Based on an example project, this is a step-by-step introduction to the basics of
configuring logs, project reports, scripts, user management and multilingual projects and
integration in STEP 7.
● WinCC flexible options:
Based on an example project, this is a step-by-step introduction to the basics of
configuring the WinCC flexible Sm@rtServices, Sm@rtAccess and OPC Server options.
Online availability
Technical documentation on SIMATIC products and SIMATIC systems is available in PDF
format in various languages at the following addresses:
● SIMATIC Guide Technische Dokumentation in Deutsch:
"
http://www.ad.siemens.de/simatic/portal/html_00/techdoku.htm"
● SIMATIC Guide for Technical Documentation in English:
"
http://www.ad.siemens.de/simatic/portal/html_76/techdoku.htm"
Conventions
Configuration and runtime software differ with regard to their names as follows:
● "WinCC flexible 2004," for example, refers to the configuration software.
The term "WinCC flexible" is used in a general context. The full name, for example
"WinCC flexible 2004", is always used when it is necessary to differentiate between
different versions of the configuration software.
● "WinCC flexible Runtime" refers to the runtime software that can run on HMI devices.
Text is highlighted as follows to simplify reading the operating instructions:
Notation Scope
"Add screen"
• Terminology that appears in the user interface, e.g., dialog
names, tabs, buttons, menu entries
• Inputs required, e.g., limit values, tag values
• Path information
"File > Edit" Operational sequences, e.g., menu commands, context menu
commands
<F1>, <Alt+P> Keyboard operation
Please observe notes labeled as follows:
Note
Notes contain important information concerning the product, its use or a specific section of
the documentation to which you should pay particular attention.

Siemens SIMATIC HMI TP 177micro Specifications

General

Brand	Siemens
Model	SIMATIC HMI TP 177micro
Category	Control Panel
Language	English