Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC427D
Operating Instructions, 05/2017, A5E31347215-AB
47
You can create, run or configure PROFINET IO applications with the "Development Kit DK-
16xx PN IO". It must be installed in addition to the device driver CP 16xx.sys. You can
download this kit and the documentation free of charge at Development Kit DK-16xx PN IO
(http://www.automation.siemens.com/net/html_00/produkte/040_cp_1616_devlopkit.htm).
You can create, run and configure the SIMATIC installation with this software package.
Information on this can be found on the SIMATIC NET Manual Collection CD. The software
package and the documentation are not included in the product package.
You will find additional information in the catalog and on the Internet at Industry Mall, the
ordering system for automation and drive technology (https://mall.industry.siemens.com).
To Next Page
Loading...
Need help?
General
