Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC427D
50 Operating Instructions, 05/2017, A5E31347215-AB
Installing the strain relief
Strain relief for the device is provided in the scope of delivery. The strain relief is designed to
prevent the lines connected to the device from being accidentally pulled out.
● 1 strain relief
● 2 screws
● 1 T10 screwdriver
Remove the marked countersunk screws.
Fasten the strain relief at the points
shown.
Use the oval head screws included with
the strain relief.
Follow the mounting procedure in reverse to remove the strain relief.
To Next Page
Loading...
Need help?
General
