Siemens SIMATIC IPC427D - Installing and Removing Cfast Cards

Expanding and assigning parameters to the device
6.2 Installing and removing CFast cards
SIMATIC IPC427D
76 Operating Instructions, 05/2017, A5E31347215-AB
6.2
Installing and removing CFast cards
The device has a slot for a CFast card on the side with the interfaces. Always use SIMATIC
IPC CFast cards for industrial applications.
NOTICE
Damage to the device
The CFast and CompactFlash connections are not compatible. The device is damaged.
Use the slot specified in this section only for a CFast card.
Note
Note the following:
•
Always insert a CFast card version 02 or higher.
•
Always replace a CFast card with a card of the same or higher version.
•
The production version can be found on the CFast card (see marking).
Requirement
● The device is switched off.
● SIMATIC IPC CFast card that is approved for industrial applications.