Siemens SIMATIC IPC477E PRO - Page 138

Technical specifications
9.6 BIOS description
SIMATIC IPC477E PRO
138 Operating Instructions, 08/2017, A5E39912462-AA
Buttons
Function
Boot From File Boot Maintenance Manager:
• Boot Options: Set boot sequence
• Driver Options: Configure drivers
• Console Options: Configure connected input device
• Boot from File: Start from an ".EFI" file
• Reset System: Restoring factory settings
Secure Boot Option
1
Configuration settings to start the device in Secure Boot mode. The only
software modules loaded are those that are known to be safe for the BIOS
or the operating system.
SCU
Setup Configuration Utility: The BIOS Setup
BIOS Update
Update BIOS from USB memory stick
MEBx
2
Intel Management Engine BIOS Extension from Active Management Tech-
nology Support (AMT)
1
Available as of Windows 8, if supported by device
2
Only if hardware supports AMT and the AMT option "Intel AMT Configuration Screens" is set to
"Enabled" in the BIOS Setup.