Siemens SIMATIC IPC477E PRO - Page 67

Operating the device and device functions
6.4 Extended device functions
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
67
The following functions are available:
Function
Command
Write-protect drive C: Switching on
ewfmgr c: -enable
Write-protect drive C: disable
(modified files are transferred)
ewfmgr c: -commitanddisable
Modified files on drive C: Accept
ewfmgr c: -commit
Display information about the EWF drive
ewfmgr c:
Display help
ewfmgr /h
Note
The EWF commands affecting the write protection do not become active until after the next
booting process.
Note
The EWF command
ewfmgr c: -commitanddisable cannot be used with the –Live
options (i.e.
not like this: ewfmgr c: -commitanddisable –live
).