Operation
6.6 Codes with disabled factory setting
SIMATIC MV320 / SIMATIC MV325
36 Operating Instructions, 08/2015, C79000-G8976-C352-03
● QR code
● UPC/EAN/UPC-E
Codes with disabled factory setting
To enable or disable these codes:
● Scan in the relevant codes (see section Code configurations (Page 53)).
The following codes are disabled in the factory settings:
● Codablock F
● Code 11
● Code 32
● Composite
● Han Xin Code
● Hong Kong 2 of 5
● IATA 2 of 5
● Matrixcode
● Matrix 2 of 5
● Micro PDF417
● MSI Plessey
● NEC 2 of 5
● Pharmacode
● Postal Codes
● Plessey
● Standard 2 of 5
● Telepen
● Trioptic
To Next Page
Loading...
Need help?
General
