Appendix
A.2 "Specify character length to be read" function
SIMATIC MV320 / SIMATIC MV325
54 Operating Instructions, 08/2015, C79000-G8976-C352-03
A current list of the codes for configuration of the SIMATIC MV325 reader is available at the
following link:
SIMATIC MV325 Configuration guide
(https://support.industry.siemens.com/cs/ww/en/ps/15161/man
)
"Specify character length to be read" function
Description of the function
With the help of this function, you can specify the code character length to be read by the
SIMATIC MV320 and SIMATIC MV325 handheld readers. When you enable this function,
the handheld readers will only read codes that have exactly the character length you have
specified.
This function is particularly useful when multiple codes with different character lengths are
printed on the product that is to be scanned.
Enabling/disabling the function
Enable
Follow these steps to enable the function:
1. Scan the following code to enable the function:
2. Scan the following code to restart the handheld reader:
To Next Page
Loading...
