EasyManua.ls Logo

Siemens SIMATIC PANEL PC 877 - Page 214

Siemens SIMATIC PANEL PC 877
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detailed descriptions
17.1 Motherboard
SIMATIC Panel PC 877
17-22 Operating instructions, Release 07/2006, A5E00877780-01
Pinout of the CPU fan power supply, X41
Pin No. Abbreviation Meaning Input/Output
1 GND Ground -
2 +12 V Switched power supply Output
3 CPU FAN_CLK Clock signal Input
Pinout of the main fan power supply, X42
Pin No. Abbreviation Meaning Input/Output
1 GND Ground -
2 +12 V Switched power supply Output
3 PG1 FAN_CLK Clock signal Input
Additional power supply connector (12V) for devices with 19'' front, X45.
Pin No. Abbreviation Meaning Input/Output
1 GND Ground -
2 GND Ground -
3 +12 V 12 V power supply Input
4 -12 V 12 V power supply Input
Connector for back-up battery, X49
A battery for buffering the CMOS RAM is connected to this connector. This is a 3.6 V Lithium
battery with a capacity of 750 mAh.
Pin No. Abbreviation Meaning Input/Output
1 + Plus pole Input
2 - Minus pole -
Connection for On / Off switch connector, X53
Pin No. Abbreviation Meaning Input/Output
1 Power On On signal Input
2 GND Ground -

Table of Contents

Related product manuals