Preface
viii
SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)
• SIMATIC
PCS 7 OSx Batch Programming Manual
This manual
describes more advanced configuration tasks involving the use of BCL,
the Batch Control Language, and the creation of batch programs.
• SIMA
TIC PCS 7 OSx Operator Manual
This manual is written for the
configuration engineer
, but it describes how to carry out the various
tasks that the process operator must do when the system is in the
Operate state.
• SIMA
TIC PCS 7 OSx Interface to S5 Controllers Manual
This manual
describes the OSx interface with SIMA
TIC S5 controllers.
• SIMA
TIC PCS 7 OSx Interface to S7 Controllers Manual
This manual
describes the OSx interface with SIMA
TIC S7 controllers.
• SIMA
TIC PCS 7 OSx Library Manual
This manual describes the
function blocks used to program the S7-400 controllers to interface with
OSx.
Be sure to check the Readme File for information that did not become
available until after the publication deadlines for the OSx manuals. Select
Help→About OSx
from the main menu bar
, and then click the
Show Readme
button
at the bottom of the About OSx dialog box.
The following manuals are available for optional PCS features.
• SIMA
TIC PCS 7 OSx Remote
T
erminal User Manual
This manual
describes the optional remote
terminal support provided by PCS 7. This
manual, which is purchased separately
, describes how to configure and
operate a remote terminal that can connect to an OSx station by means
of a telephone line.
• SIMA
TIC PCS 7 OSx X
T
erminal User Manual
This manual describes
how to connect and operate an X
terminal as an extension of an OSx
station.
Optional PCS
Features
To Next Page
Loading...
