Siemens SIMATIC PCS 7 OSx Hardware Manual

Preface
vii
SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)
Preface
The SIMA TIC PCS 7 OSx 4.0.0 Hardware Manual (P A–RISC) includes
installation procedures, hardware descriptions, and maintenance
information about the B132L+ model of SIMA TIC PCS 7 OSx.
• Chapter 1 describes the SIMA TIC PCS 7 OSx hardware components
and how they connect to the system.
• Chapter 2 describes card locations and explains how to use system
diagnostics.
The HP Model B132L/B132L+/B160L/B180L Owner ’ s Guide that is
packed with your B132L+ computer gives further information about
installing and using hardware components.
The OSx manual set consists of several manuals. If you cannot find the
information that you need in the SIMA TIC PCS 7 OSx Hardware Manual
(P A RISC) , check these other books:
• SIMA TIC PCS 7 OSx System Administration Manual This manual
offers help in configuring network nodes, and for procedures that
describe how to configure printers, how to archive data, and how to
back up files.
• SIMA TIC PCS 7 OSx Process Configuration Manual This manual
describes the primary tasks required to configure your system for
controlling your process.
• SIMA TIC PCS 7 OSx Graphical Editor Manual This manual
describes how to create the graphical displays used with OSx.
• SIMA TIC PCS 7 OSx Reports Manual This manual describes how to
create reports on your process and your configuration.
• SIMA TIC PCS 7 OSx Recipe Manual This manual describes more
advanced configuration tasks involving the creation and use of recipes.
Purpose of This
Manual
What’s in the Other
Manuals?

Siemens SIMATIC PCS 7 OSx Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 OSx
Category	Control Systems
Language	English