Siemens SIMATIC PCS 7 OSx - Overview of System Components

Hardware Overview
1-2
SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)
1.1 Overview of System Components
Figure 1-1 shows the locations for the hardware connections to a SIMA TIC
PCS 7 OSx station. The following sections describe the component
connections.
•
Connecting input devices, Section 1.9
• Connecting the monitor , Section 1.10
• Connecting the system to the Industrial Ethernet network,
Section 1.11
• Connecting options: printer , Section 1.12
• Connecting options: S7–200 CPU 212 alarm option, Section 1.13
• Connecting options: magneto-optical drive, Section 1.14
!
CAUTION
This is an FCC Class A product intended for use in industrial environments.
Use of this product in a domestic environment may cause radio frequency
interference, which may disrupt other electronic equipment.
If you are using this product in a non-industrial, non-scientific environment,
take proper installation precautions.