Siemens SIMATIC PCS 7 OSx Hardware Manual

Optional Card Locations
2-7
SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)
• The Magneto Optical Test checks for the presence of the magneto-optical
drive and the ability to read from and write to the drive.
• Run All Tests runs all the above tests in the listed order .
• Review Test Results creates two files when you run a test. The Results
File displays a simple Pass or Fail for the test run. The Detail File
offers additional information about the test run. Y ou can view these
files on the screen or print them to a selected printer .
• Clear Output Files clears both the files created in the Review T est
Results option.
• Printer Calibration allows you to calibrate a video printer (T ektronix
RGB II) against all-white and all-black screens. T o run this calibration
you must be in the Offline state with no editor running.
• Quit dismisses the diagnostics screen.
T o cancel a diagnostic test while it is running, press the Delete key. Note
that this not only stops the current test from running, but also dismisses
the diagnostics process.

Siemens SIMATIC PCS 7 OSx Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 OSx
Category	Control Systems
Language	English