Configuring/Programming
10.1 Configuring CANopen Manager
SIMATIC PN/CAN LINK
108 Operating Instructions, 03/2022, A5E39895388-AC
Handling of the OD table
After you have added a CANopen node, you have two options in the "Electronic Data Sheet
(EDS)" menu:
1. Using an existing EDS file via the "Import EDS file..." button
Figure 10-9 Importing the EDS file
2. Manual creation of an object dictionary (OD) using the "Define object dictionary" button:
A template is displayed in the "Object dictionary (OD)" menu.
Figure 10-10 Defining the object dictionary
To Next Page
Loading...
