Siemens SIMATIC PN/CAN LINK

Configuring/Programming
10.3 Configuring CAN transparent
SIMATIC PN/CAN LINK
Operating Instructions, 03/2022, A5E39895388-AC
133
Configuring transmit/receive messages
1. Double-click "Transmit message" or "Receive message" ① in the HW catalog. The
corresponding message type is placed as a submodule in the "CAN transparent" module.
2. Select a send message entry or a receive message entry with the left mouse button in the
device overview ②.
3. Create the necessary message definitions ③.
Figure 10-31 Transmit and receive messages