New properties/functions
3.3 Installation and handling of the new HSP
SIMATIC PN/CAN LINK
Operating Instructions, 03/2022, A5E39895388-AC
21
Adding a new PN/CAN LINK to your configuration
Using the HSP_V17_0358_001_Link_PN_CAN_V2.0 you can configure the PN/CAN LINK with
firmware version V1.0 and V2.0.
When selecting the PN/CAN LINK, you can choose the desired firmware version in the HW
catalog.
Figure 3-2 Selecting a firmware version in the HW catalog
The new "Simple slave functionality" is only available as of version V2.0.
To Next Page
Loading...
