New properties/functions
3.3 Installation and handling of the new HSP
SIMATIC PN/CAN LINK
22 Operating Instructions, 03/2022, A5E39895388-AC
Using an existing configuration
Upgrading PN/CAN LINK from V1.0 auf V2.0 (Precondition: Use a PN/CAN LINK V2.0 in your
plant)
1. Select the PN/CAN LINK in the device view.
2. To upgrade the PN/CAN LINK, click the "Change firmware version" button under "General >
Catalog information".
3. Confirm the "Change device - PN/CAN LINK" dialog with "OK".
4. As a downgrade from V2.0 to V1.0 is not possible, the "Change firmware version" button is
disabled afterwards.
To Next Page
Loading...
