2
2-2
Working with S5-DOS/ST
C79000-G8576-C760-03
2.1 Contents of the Package
The exact content of your system software is listed in the Product
Information which is supplied either with your new PG or with
your retrofit package for STEP 5.
After installing the software, you will find files of the type *.TXT
(for example, STEP5E.TXT) or of the type *.WRI (for example
PRODINFE.WRI) in the C:\INFO\ directory. You can use the
appropriate editor (for example EDIT or WordPad) to read or print
this information. These files contain detailed information on the
individual software components.
Using the MS-DOS command
TYPE STEP5E.TXT | MORE
you can display the file STEP5E.TXT page by page.
You can enter MS-DOS
commands with the option /? to display
brief information about the function and the permitted options.
Under Windows
, you can obtain help on the current function at any
time by pressing F1. You can also obtain information from the
entries in the Help menu.
On PGs, you can also display help texts on the current function
under STEP 5
by pressing SHIFT + F8 or the Help key
(PG 730/750/770).
This Help key has been replaced on the PG 720 and PG 740 by the
keys F
n
+ F1.
Display Detailed
Information
Example:
Help Directly on
the Screen
Installing and Starting Up
To Next Page
Loading...
Need help?
General
