Siemens SIMATIC S5 Series User Manual

7
7-14
Working with S5-DOS/ST
C79000-G8576-C760-03
7.8 Printing an Edited Assignment
1. Open the key assignment with the menu command
File ! Open and open the file of the type *.S5K.
2. Select File ! Print.
7.9 Inserting DOS Commands
You can only call the DOS command level when there is sufficient
free user memory.
1. Select File ! DOS.
The command line of the DOS level is shown.
2. Type in a DOS command.
3. To get back to the editor, type in the EXIT command and press
Return.
7.10 Switching Between a Color and Monochrome Screen
In the keyboard editor, select the menu items Options !
Switchover monochrome $ color.
Printing the
Assignment
Switching to the
DOS Level
Keyboard Editor

Siemens SIMATIC S5 Series Specifications

General

Series	SIMATIC S5
Manufacturer	Siemens
Category	Controller
Programming Language	STEP 5
Modular Design	Yes
Power Supply	24V DC
Communication Interfaces	RS-232, RS-485
Memory Type	EPROM, RAM
Digital Inputs/Outputs	Varies depending on module configuration
Analog Inputs/Outputs	Varies depending on module configuration
CPU Type	Varies by model
Memory	Varies by model
Operating Temperature	0°C to 60°C