Siemens SIMATIC S5 Series User Manual

7
7-12
Working with S5-DOS/ST
C79000-G8576-C760-03
Requirement: You have opened a key assignment file.
1. Select the key assignment you want to delete.
The selected line is highlighted on a colored or gray
background, the line number is shown in the lower left corner
of the window.
2. Select Edit  Delete or press the Del key.
The key assignment in the selected line is deleted from the
screen.
Note: After using the PRINT and PAUSE keys, the input must
be enabled again via the keyboard with the key combination
CTRL + SHIFT.
3. If necessary, undelete the assignment by clicking on the square
box in the top left of the window frame and clicking on No.
With “No”, all the changes made since you last saved are lost.
 Select File  Save or
 Select File  Save as to save the file under another name or in
another directory.
Deleting a Key
Assignment
Saving Key
Assignments
Keyboard Editor

Siemens SIMATIC S5 Series Specifications

General

Series	SIMATIC S5
Manufacturer	Siemens
Category	Controller
Programming Language	STEP 5
Modular Design	Yes
Power Supply	24V DC
Communication Interfaces	RS-232, RS-485
Memory Type	EPROM, RAM
Digital Inputs/Outputs	Varies depending on module configuration
Analog Inputs/Outputs	Varies depending on module configuration
CPU Type	Varies by model
Memory	Varies by model
Operating Temperature	0°C to 60°C