Glossary-12
Working with S5-DOS/ST
C79000-G8576-C760-03
RAM (Random Access Memory) is a read/write memory in which
every memory location can be addressed individually and its
contents be changed. RAM is used to store data and programs.
File security; this file attribute can be assigned with a DOS
command or in the file manager.
Diskette security; for 5 1/4” diskettes by sticking a tab over the
notch at the right-hand edge, for 3 1/2” diskettes or EOD disks
by opening the read-only slot.
ROM (Read Only Memory) is a memory in which every memory
location can be addressed individually. The stored programs and
data have been programmed at the factory before delivery and
cannot be changed by the user.
S5-DOS is an operating system based on PCP/M.
S5-DOS/ST is an operating system based on MS-DOS.
S5-DOS/MT is an operating system based on FlexOS. This is the
standard operating system for all S5/MT applications. Due to its
multitasking capabilities in conjunction with the fully-graphic user
interface (X/GEM and PlantTop), the basis for data management
(Btrieve) as well as the network software FlexNet and SINEC, all
the tools are present which are required.
R
RAM
Read Only
ROM
S
S5-DOS
S5-DOS/ST
S5-DOS/MT
Glossary
To Next Page
Loading...
Need help?
General
