Siemens SIMATIC S5 Series User Manual

Glossary-14
Working with S5-DOS/ST
C79000-G8576-C760-03
The collective term for all programs which are used on a computer.
The operating system, the firmware (resident parts of the operating
system), the user programs and also any on-line documentation
belonging to the programs are all part of the concept “software”.
The programming language STEP 5 with the types of
representation ladder diagram (LAD), control system
flowchart (CSF) and statement list (STL) is part of the STEP 5
Basic Package. Programs can be generated off-line at the PG and
transferred to the PLC memory on-line and tested. User programs
can be transferred to EPROM/EEPROM submodules via an
EPROM programming interface module. Programs and plant
statuses can be documented via the printer and the user programs
stored on diskette or hard disk.
See Icon.
In a Windows application, the title bar is the horizontal bar (at the
top of a window) that contains the title of the window or dialog
box. On many windows, the title bar also contains the Control
menu box and Maximize and Minimize buttons.
Software
STEP 5
Symol
T
Title Bar
Glossary

Siemens SIMATIC S5 Series Specifications

General

Series	SIMATIC S5
Manufacturer	Siemens
Category	Controller
Programming Language	STEP 5
Modular Design	Yes
Power Supply	24V DC
Communication Interfaces	RS-232, RS-485
Memory Type	EPROM, RAM
Digital Inputs/Outputs	Varies depending on module configuration
Analog Inputs/Outputs	Varies depending on module configuration
CPU Type	Varies by model
Memory	Varies by model
Operating Temperature	0°C to 60°C