Siemens Simatic S7-1500R - Page 354

cULus HAZ. LOC. approval
+$=/2&
Underwriters Laboratories Inc. in accordance with
•
UL 508 (Industrial Control Equipment) OR UL 61010-1 and UL 61010-2-201
•
CAN/CSA C22.2 No. 142 (Process Control Equipment) OR CAN/CSA C22.2 No. 61010-1 and
CAN/CSA C22.2 No. 61010-2-201
•
ANSI/ISA 12.12.01
•
CAN/CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D T4;
Class I, Zone 2, Group IIC T4
Installation Instructions for cULus haz.loc.
•
WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known
to be non-hazardous.
•
WARNING - Explosion Hazard - Substitution of components may impair suitability for Class
I, Division 2 or Zone 2.
•
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2,
Group IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAYS.
FM approval
Factory Mutual Research (FM) according to
•
Approval Standard Class Number 3611, 3600, 3810
•
ANSI/UL 121201
•
ANSI/UL 61010-1
•
CAN/CSA C22.2 No. 213
•
CAN/CSA C22.2 No. 61010-1
•
CAN/CSA C22.2 No. 0-10
APPROVED for use in Class I, Division 2, Group A, B, C, D T4;
Class I, Zone 2, Group IIC T4
Installation Instructions for FM
•
WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known
to be non-hazardous.
•
WARNING - Explosion Hazard - Substitution of components may impair suitability for Class
I, Division 2 or Zone 2.
•
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2,
Group IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAYS.
354
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD
Technical specifications
15.1 Standards and Approvals