03/2013 3 Setting up functions
3.4 Fault Services
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3-173
3.4.21 Diagnostic actions
Overview
The following actions are available:
Fig. 3-57: Selecting diagnostic actions
Description of the "Upload files" function
The diagnostic action “Upload files” can be used to upload files from the file system
of SINUMERIK and NC in the server upon a trigger event.
In the column with the paper clip, the collection of uploaded files can be marked for
sending as an attachment for a notification of the workflow for this control monitor.
Fig. 3-58: Upload files
Function Description Type
File size per file
Maximum Determines the maximum size for each
file to be uploaded.
MB The file size must be specified between 1
MB and 10 MB.
A file that exceeds this maximum value
will not be loaded onto the server.
DISPLAY
INPUT
(Digits from 1
to 10)
Files (x)
File type A Windows file specification and ac NC
file be selected for the file type.
SELECTION
Path Shows the files entered with path details
for uploading purposes
Option: The list of specified files can be
sorted in ascending or descending order
(triangle).
DISPLAY
INPUT
Deletes a file for uploading from the list. ACTION
To Next Page
Loading...
