6 Administration 03/2013
6.1 Management of the organization
© Siemens AG 2006-2013 All Rights Reserved
6-280 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function Description Type
machine
displayed again separately, as described above.
Exporting Launches the export function when multiple
machines are selected.
ACTION
Upgrade Launches the conversion from Version 3 to
Version 4 when multiple machines are selected.
ACTION
Delete Launches the machine deletion procedure when
multiple machines are selected.
ACTION
Select entire
page
Enables easy selection of all machines on the
current page (up to 200).
SELECTION
Select all Enables easy selection of all machines, even
those not visible on the current page.
SELECTION
Exporting machines
A machine must be switched into an inactive state to export a machine,
configurations and data. This is a function setting that can be selected and
deselected from the PC for every machine. Export is only for your "own machines"
(no external machines that have been released).
Destination data must be specified for the export. These include the name of the
server to which the export should be imported (generally an eP satellite) and the
organization on the server.
Fig. 6-5: Exporting and importing a machine
The export and import overview lists correspond to those that are described for
exporting and importing.
6.1.4 Editing the master data of a machine
To Next Page
Loading...
