03/2013 6 Administration
6.1 Management of the organization
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
6-279
Function Description Type
To edit the master data of a machine, you can
switch to the master data menu.
See also Section: Editing the master data of a
machine
ACTION
For multimachine functions such as deleting,
upgrading, or exporting, all machines or
individual machines can be selected or cleared.
SELECTION
Internal name,
Manufacturer
Manufacturers
number
Manufacturer
ID
This selection is used to specify which
information is displayed in a column.
DISPLAY
SELECTION
V SINUMERIK Integrate:
Version 3 or 4
DISPLAY
The color changes to green to indicate that a
machine is active or connected.
DISPLAY
Lines displayed on this icon indicate that
machine logon is required to operate
SINUMERIK Integrate.
An arrow indicates that logon is not necessary.
DISPLAY
Details Company, location, and production unit are the
details from the machine master data that are
displayed.
DISPLAY
Device class Displays the device class selected in the
machine master data (SINUMERIK, SIMATIC,
IPC).
DISPLAY
Creates a new machine with same settings as
an existing machine.
Only a new machine name (ID) must be
uniquely assigned.
ACTION
If the function is enabled, the icon for the export
of machines is displayed in this column.
The function is necessary to move
configurations and data between various servers
(such as eP satellite).
ACTION
If you want to run an individual machine with
another server, export the machine and import it
on the other server.
The machine must first be disconnected before it
is exported.
ACTION
Activate the machine to use
SINUMERIK Integrate. A deactivated machine
can not use SINUMERIK Integrate applications.
ACTION
(Toggle)
Deletes a machine permanently. Data is no
longer available for this machine.
ACTION
Selected If an individual machine is selected, it is ACTION
To Next Page
Loading...
