Siemens Simatic S7-300 - Disconnecting the Machine (on the Control and on the PC)

7 Establishing a connection and diagnostics 03/2012
7.1 Connecting the machine
© Siemens AG 2006-2013 All Rights Reserved
7-308 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2012
7.1.3 Disconnecting the machine (on the control and on the PC)
Operating sequence on the control
A machine is disconnected from the database:
Fig. 7-10: Disconnecting a machine on the control
Fig. 7-11: Confirming the disconnection
After disconnection, all the information regarding the database has been removed
from the local hard disk of the PCU.
Fig. 7-12: Information about the disconnection