03/2012 7 Establishing a connection and diagnostics
7.3 Client diagnostics
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2012
7-317
7.3 Client diagnostics
Function description
A local application has been developed for client diagnostics, which the user at the
machine can use to analyze the client software while the controll is running.
As soon as client diagnostics is started a screen displaying the main diagnostic
information required for an initial problem analysis appears.
The user can also start a comprehensive "diagnostics session" if problems occur,
and transmit detailed information to SINUMERIK Integrate. (Start session)
Fig. 7-19: Example of client diagnostics
To Next Page
Loading...
