Siemens Simatic S7-300 - Page 193

03/2013 3 Setting up functions
3.6 Copy
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3-193
Fig. 3-76: Selection on the target machine
Fig. 3-77: Copying limit values
Copying from the source machine to the target machine:
Function Description
The preselected user configurations are displayed on the target
machine.
The preselection to copy to the target machine is canceled for the
user configurations selected in the target machine.
Copying to the target machine is displayed.
Overwriting the user configuration in the target machine is shown.
Shows the copy direction of the preselected user configuration: From
the source machine to the target machine, or vice versa.
Copy
Copying is in progress.