Siemens Simatic S7-300 - Page 197

03/2013 3 Setting up functions
3.6 Copy
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3-197
Function Description Type
see also: Selecting a machine.
Rules for
copying
This informational menu indicates the rules
used for copying and presents important
information for cases in which copying is not
possible.
DISPLAY
Cancel Returns to the previous menu from which the
copy function was accessed.
The copy function is not carried out.
ACTION
Copy The copying process is started.
The menu changes to a status display for the
current copy process.
ACTION
DISPLAY
Fig. 3-80: Copying to several machines
Function Description Type
Source machine The source machine for the copying process is
indicated during the entire operation.
DISPLAY
Current target
machine
If only one target machine is selected, it is
displayed here corresponding to the target
machine.
If multiple target machines are selected, they are
displayed as a list in a separate field.
DISPLAY
User The user who was logged on to
SINUMERIK Integrate at the time the copying
process was started is displayed here.
DISPLAY