6 Administration 03/2013
6.1 Management of the organization
© Siemens AG 2006-2013 All Rights Reserved
6-288 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function Description Type
To edit the master data of a machine, you
can switch to the master data menu.
See also Section: Editing the master data of
a machine
ACTION
For multimachine functions such as deleting,
upgrading, or exporting, all machines or
individual machines can be selected or
cleared.
SELECTION
Internal name
Manufacturer
Manufacturer's
number
Manufacturer ID
This selection is used to specify which
information is displayed in a column.
DISPLAY
SELECTION
V SINUMERIK Integrate:
Version 3 or 4
DISPLAY
The color changes to green to indicate that a
machine is active or connected.
DISPLAY
Lines displayed on this icon indicate that
machine logon is required to operate
SINUMERIK Integrate.
An arrow indicates that logon is not
necessary.
DISPLAY
Details Company, location, and production unit are
the details from the machine master data that
are displayed.
DISPLAY
Device class Displays the device class selected in the
machine master data (SINUMERIK,
SIMATIC, IPC).
DISPLAY
Creates a new machine with same settings
as an existing machine.
Only a new machine name (ID) must be
uniquely assigned.
ACTION
Exporting
machines
If you want to run an individual machine with
another server, export the machine and
import it on the other server.
The machine must first be disconnected
before it is exported.
ACTION
Activate the machine to use
SINUMERIK Integrate. A deactivated
machine can not use any function.
ACTION
(Toggle)
Deletes a machine permanently. Data is no
longer available for this machine.
ACTION
To Next Page
Loading...
