Siemens Simatic S7-300 - Page 291

03/2013 6 Administration
6.1 Management of the organization
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
6-291
Function Description Type
Prod. unit Specifies the production unit to which the
machine belongs: Machines can be selected in
the machine tree according to their production
unit.
DISPLAY
INPUT
(Max. 40
characters,
return,
backspace,
°, $, \, ;, >, <,
are not
permissible.)
Zip code Entry for the zip code of the location
Country Entering the country (location) of the machine
DISPLAY
INPUT
(max. 40
characters,
all characters
are
permissible.)
Settings
Software
version
Adapting the server software version of the
machine
Notice:
It is only possible to upgrade to a higher
software version. The upgrade is performed the
next time the machine is booted after the
change. After that it is no longer possible to
undo the change!
DISPLAY
SELECTION
Remote
access
"Always request approval"
When this option is selected, it is always
necessary to have authorization to use
particular functions on this machine for a
remote access.
SELECTION
Measure-
ments
"Display rigidity"
When this option is selected, rigidity is
displayed with the axis tests.
SELECTION
Machine
status
"Activate machine status recognition"
When this option is selected, client monitoring
is activated automatically. The variables that
can record start and end of the possible data
acquisition are available.
Generate machine event
SELECTION