SIMOCODE pro Safety
3.3 Failsafe DM-F LOCAL digital module
18
SIMOCODE pro - Fail-Safe Digital Modules
Manual, 11/2017, NEB631679702000/RS-AA/002
Standard function (non-safety-related)
The non-safety-related standard function comprises:
● Operational control of the actuators (contactors) that switch the motor on and off
● Diagnostic information (e.g. safety-related tripping, fault in the sensor circuit)
The DM-F Local is available in the following versions:
24 V DC:
Figure 3-1 DM-F Local 24 V DC with sensor inputs, feedback and relay enabling circuits, stop
category 0 according to EN 60204-1
To Next Page
Loading...
