S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
361
Note
Comply with the local national regulations for the transportation of motors.
Note
Observe the information on the original packaging when transpo
rting and setting down the
● Transport the motor in its original packaging.
● Use suitable load suspension devices when transporting the motor.
● Transport the motor carefully.
Environmental conditions for transporting the motor in the transport packaging according to
Class 2K3 to EN 60721-3-2 - with the exception of environmental influencing quantities "Air
temperature" and "Condensation"
Climatic ambient conditions
15 °C … + 70 °C,
Highest relative humidity
% at 40 °C, condensation not permissi-
Mechanical ambient conditions
Shock and vibration permissible according to
3M8 to EN 60721
-3-3: Individual shocks (6
m/s²
Protection against chemical substances
Protected in acc. with Class 2C2
Biological ambient conditions
Suitable in acc. with Class 2B2
1. Set the motor down on a hard, level surface.
2. Secure the motor against unintentional movements.
To Next Page
Loading...
Need help?
General