Mechanical properties
3.1 Cooling
S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
41
Cooling power to be dissipated in kW
1FT7105-5WB7 1200
1FT7105-5WF7 1900
Table 3- 4 Cooling power to be dissipated 1FT7 High Dynamic
Cooling power to be dissipated in kW
The motor can only be operated in a closed cooling-water circuit with a cooling unit.
Materials used in the motor cooling circuit
The materials used in the cooling circuit must be coordinated with the materials in the motor.
Table 3- 5 Materials used in the motor cooling circuit
To Next Page
Loading...
